كربيد التيتانيوم

كربيد التيتانيوم
الأسماء
	اسم أيوپاك titanium carbide
	أسماء أخرى titanium(IV) carbide
المُعرِّفات
رقم CAS
3D model (JSmol)	Interactive image;
ChemSpider	26995141;
ECHA InfoCard	100.031.916
رقم EC	235-120-4;
PubChem CID	4226345;
UNII	7SHTGW5HBI ;
CompTox Dashboard (EPA)	DTXSID10583531 ;
	InChI InChI=1S/C.Ti Key: CYKMNKXPYXUVPR-UHFFFAOYSA-N;
	SMILES [C].[Ti];
الخصائص
الصيغة الجزيئية	CTi
كتلة مولية	59.88 g mol-1
المظهر	black crystalline powder
الكثافة	4.93 g/cm3
نقطة الانصهار
نقطة الغليان
قابلية الذوبان في الماء	Insoluble
القابلية المغناطيسية	+8.0·10−6 cm3/mol
البنية
البنية البلورية	Cubic, cF8
الزمرة الفراغية	Fm3m, No. 225
هندسة; إحداثية	Octahedral
مركبات ذا علاقة
مركـّبات ذات علاقة	Zirconium carbide; Hafnium carbide; Beryllium carbide; Vanadium carbide; Tungsten carbide; Molybdenum carbide; Diamond; Silicon carbide; Titanium nitride;
	ما لم يُذكر غير ذلك، البيانات المعطاة للمواد في حالاتهم العيارية (عند 25 °س [77 °ف]، 100 kPa).
	verify (what is ?)
	مراجع الجدول

Titanium carbide, Ti C, is an extremely hard (Mohs 9–9.5) refractory ceramic material, similar to tungsten carbide. It has the appearance of black powder with the sodium chloride (face-centered cubic) crystal structure.

It occurs in nature as a form of the very rare mineral khamrabaevite (uz) (روسية: Хамрабаевит) - (Ti,V,Fe)C. It was discovered in 1984 on Mount Arashan in the Chatkal District,^[1] USSR (modern Kyrgyzstan), near the Uzbek border. The mineral was named after Ibragim Khamrabaevich Khamrabaev, director of Geology and Geophysics of Tashkent, Uzbekistan. Its crystals as found in nature range in size from 0.1 to 0.3 mm.

Physical properties

Titanium carbide has an elastic modulus of approximately 400 GPa and a shear modulus of 188 GPa.^[2]

Titanium carbide is soluble in solid titanium oxide, with a range of compositions which are collectively named "titanium oxycarbide" and created by carbothermic reduction of the oxide.^[3]

Manufacturing and machining

Tool bits without tungsten content can be made of titanium carbide in nickel-cobalt matrix cermet, enhancing the cutting speed, precision, and smoothness of the workpiece.^{[بحاجة لمصدر]}

The resistance to wear, corrosion, and oxidation of a tungsten carbide–cobalt material can be increased by adding 6–30% of titanium carbide to tungsten carbide. This forms a solid solution that is more brittle and susceptible to breakage.^{[مطلوب توضيح]}

Titanium carbide can be etched with reactive-ion etching.

Applications

Titanium carbide is used in preparation of cermets, which are frequently used to machine steel materials at high cutting speed. It is also used as an abrasion-resistant surface coating on metal parts, such as tool bits and watch mechanisms.^[4] Titanium carbide is also used as a heat shield coating for atmospheric reentry of spacecraft.^[5]

7075 aluminium alloy (AA7075) is almost as strong as steel, but weighs one third as much. Using thin AA7075 rods with TiC nanoparticles allows larger alloys pieces to be welded without phase-segregation induced cracks.^[6]

References

^ Dunn, Pete J (1985). "New mineral names". American Mineralogist. 70: 1329–1335.
^ Chang, R; Graham, L (1966). "Low-Temperature Elastic Properties of ZrC and TiC". Journal of Applied Physics. 37 (10): 3778–3783. Bibcode:1966JAP....37.3778C. doi:10.1063/1.1707923.
^ Fatollahi-Fard, Farzin (2017-05-01). Production of Titanium Metal by an Electrochemical Molten Salt Process (thesis thesis) (in الإنجليزية). Carnegie Mellon University.
^ Gupta, P.; Fang, F.; Rubanov, S.; Loho, T.; Koo, A.; Swift, N.; Fiedler, H.; Leveneur, J.; Murmu, P.P.; Markwitz, A.; Kennedy, J. (2019). "Decorative black coatings on titanium surfaces based on hard bi-layered carbon coatings synthesized by carbon implantation". Surface and Coatings Technology. 358: 386–393. doi:10.1016/j.surfcoat.2018.11.060. hdl:2292/46133. S2CID 139179067.
^ Sforza, Pasquale M. (13 November 2015). Manned Spacecraft Design Principles (in الإنجليزية). Elsevier. p. 406. ISBN 9780124199767. Retrieved 4 January 2017.
^ "New welding process opens up uses for formerly un-weldable lightweight alloy". newatlas.com (in الإنجليزية). 13 February 2019. Retrieved 2019-02-18.

?

[1] Dunn, Pete J (1985). "New mineral names". American Mineralogist. 70: 1329–1335.

[2] Chang, R; Graham, L (1966). "Low-Temperature Elastic Properties of ZrC and TiC". Journal of Applied Physics. 37 (10): 3778–3783. Bibcode:1966JAP....37.3778C. doi:10.1063/1.1707923.

[3] Fatollahi-Fard, Farzin (2017-05-01). Production of Titanium Metal by an Electrochemical Molten Salt Process (thesis thesis) (in الإنجليزية). Carnegie Mellon University.

[4] Gupta, P.; Fang, F.; Rubanov, S.; Loho, T.; Koo, A.; Swift, N.; Fiedler, H.; Leveneur, J.; Murmu, P.P.; Markwitz, A.; Kennedy, J. (2019). "Decorative black coatings on titanium surfaces based on hard bi-layered carbon coatings synthesized by carbon implantation". Surface and Coatings Technology. 358: 386–393. doi:10.1016/j.surfcoat.2018.11.060. hdl:2292/46133. S2CID 139179067.

[5] Sforza, Pasquale M. (13 November 2015). Manned Spacecraft Design Principles (in الإنجليزية). Elsevier. p. 406. ISBN 9780124199767. Retrieved 4 January 2017.

[6] "New welding process opens up uses for formerly un-weldable lightweight alloy". newatlas.com (in الإنجليزية). 13 February 2019. Retrieved 2019-02-18.

[1]

[2]

[3]

[4]

[5]

[6]

Physical properties

Manufacturing and machining

Applications

See also

References